Spot Welding - Resistance Welding Controller

 

 

Our Spot Welding Controller gives 100 % Certainty of Welded Spots


Spot Welding Controller SettingSpot Welding

Buzzer alarm   Zero Rejection by spot welding controller 


In FORWEL – Kirti Spot Welding Controller you can set the values of parameters and welding current as well as lower and upper limit of current after validation. Our Spot Welding Controller has a smart weld monitor which continuously checks each spot for quality within set parameters.

During the process the smart weld monitor takes feedback after every half cycle and verifies the set welding current and other parameters. If the values are not as per the settings the corrections are applied in the next half cycle of the process.

This quick response time of the Spot Welding Controller maintains process consistency.

Buzzer alarm and beacon light which is installed over the machine gives alarm and flashing light if the spot is above or below of set permissible current limit. Thus faulty welding is detected instantaneously.

With this spot welding controller you can weld on the spot and check on the spot.

The spot welding controller thus keeps the complete process under control.

............................................................................................................................................

 

 

Designed By - Rutuj Worth Concepts